| |
HLC 2160
|
HLC 2180 |
|
21' x 60" |
21" x 80 " |
| Swing over bed |
30.86"
(530mm) |
Swing
over cross slide
|
13.38" (340mm)
|
Swing in gap (gap bed
lathe)
|
28.34"
(720mm)
|
Length
of gap in front of face plate
|
6.10" (155mm)
|
| Height from floor to work
center |
44.17"
(1122m) |
| Max.
distance between centers |
60"
(1526mm)
|
80"
(2036mm) |
| Hole through spindle |
3/14"
(80mm) |
| Taper
hole in center adapter |
ASA #350 X Morse No.6 |
| Spindle nose |
D1-8 Camlock
|
| Number
of speed changes |
12
|
| Range of spindle speeds |
25 to 1500
R.P.M.
|
| Number
of feed changes |
80 |
| Range of feeds per revolution
Longitudinal |
Leadscrew
in inch 0.0024" - 0.037"
Leadscrew in metric 0.061 - 0.95 mm
|
| Longitudinal
Cross |
1/2 of longitudinal feeds |
| Leadscrew diameter
and thread |
1.34" (34mm) and 4TPI (P=6 mm) |
| Threading range
Whitworth |
4 to 56 TPI (40)
2 and 19 TPI available by using change gears |
| .......Metric |
0.5 - 7.0 mm pitch (23)
0/6 and 0/9 mm pitch available by using change gears.
|
| .......Module |
0.5
to 7.0 M (20) |
| .......D.P. |
4 to 28 D.P (19) |
| Tool slide travel |
4.33" (110 mm) |
| Cross slide travel |
10.62" (270 mm)
|
| Quill Travel |
6/3" (160 mm) |
| Center |
Morse Taper No.4 |
| Width of bed |
14.56" (270 mm) |
| Main drive motor |
10 HP (4P)
(7.5KW), 220/440 volt |
| Floor space required |
119.5" x 41.3"
(3037 x 1049 mm)
|
139.5" x 41.3"
(3543 x 101 mm) |
| Net Weight (approx.) |
5434 lbs.
(2470 kg) |
6334 lbs.
(2870 kg) |
| |
|
