CK	Download PDF (4.76 MB)
	MACHINE SPECIFICATIONS
CK-2000 CK-3000 CK-4000 CK-5000 CK-6000 CK-7000 CAPACITY Swing over bed 30" ( 760 mm ) / 34" (870 mm) Swing over cross slide 14.7" (360 mm) / 18.5" (470 mm) Max cutting length 82" (2100 mm) 126" (3200 mm) 169" (4300 mm) 212" (5400 mm) 256" (6500 mm) 299" (7600 mm) Max cutting Dia 13.97" (355 mm) (30") / 18.30" ( 465 mm) (34") Height from floor to work center 44.48" (1130 mm) (30") / 46.65" (1185 mm) (34") Width of bed 28" (710 mm) HEAD STOCK Spindle nose A2-20 Hole through spindle 12.5" Number of speed changes 4 steps Range of spindle speed 10 ~ 400 r.p.m Main drive motor 40 HP (AC 30 kw) (cont) Rear end of spindle Rear chuck adaptor ready CARRIAGE & COMPOUND Max stroke X axis 20.86" ( 530 mm ) Max stroke Z axis 82" (2100 mm) 126" (3200 mm) 169" (4300 mm) 212" (5400 mm) 256" (6500 mm) 299" (7600 mm) Ball screw X axis Ø1.26" (Dia 32 mm) P=5 Ball screw Z axis Ø2.5" ( Dia 63mm) P=10 Ø3.15" (Dia 80mm) P=10 Rapid traverse X axis 314" / min (8 M /min) Rapid traverse Z axis 314" / min (8 M/ min) Servo motor for X axis 5 HP (AC 4 KW) Servo AC motor Z axis 9 HP (AC 7 KW) TAILSTOCK   Diameter of quill 7.08" (180 mm) Stroke/Center (Standard) 9.84" (250 mm) / MT#6 / Manual, Electrical and Manual (Option) Rotary type/Center (Option) 9.84" (250 mm) / Spindle Nose A2-5, MT#6 / Electrical and Manual TURRET Turret type V8 or H4/6 Hydaulic (Standard) or AC servo V8 turret (Option) MOTOR TYPE   Hydraulic system 1.5 KW Lubrication system 700 W Coolant system 0.75 KW Chip conveyor 0.75 KW Floor space required 103" * 259" *302" *346" *389" *453" *496" Net weight (30") 26,180 lbs 29,480 lbs 32,780 lbs 36,080 lbs 39,380 lbs 42,680 lbs Net weight (34") 27,280 lbs 30,580 lbs 34,320 lbs 37,400 lbs 40,700 lbs 44,000 lbs

Specifications are subject to change without notice

About | Products | Dealers | Contact