HSX HD
67 / 73 / 79 Ultra Large Swing Lathes

Standard Features

  • 40 HP, 6P Main Motor, 460V/60HZ/3PH
  • 6” Spindle Bore (Opt. 8” Bore)
  • Spindle Nose: ASA-A2-15
  • 4-Jaw 55” Face Plate
  • 1 x 23.6” Steady Rest with Roller Jaw (Min. Capacity11.02”)
  • Hardened and Ground Bedways
  • Tool Slide with T-Slot
  • Motorized Tailstock Body
  • Coolant System with Pump and Piping
  • Tool Box with Necessary Wrenches & Spanners
  • Instruction Manual and Parts List

Optional Accessories

  • 70.9” Face Plate & Boring Mill Jaws (4pc Independent)
  • 11.8” Steady Rest With Roller Jaws (Min. Capacity 2.78”)
  • 23.6” Steady Rest
  • 35.43” Steady Rest
  • Follow Rest (Pad Jaw)
  • Roller Rest (Two point)
  • Halogen Work Light
  • Rotating Quill Type Tailstock
  • 50HP Main Motor Upgrade
  • 8” Bore Upgrade
  • Traveling Chip Guard (Follows the carriage)
  • Longitudinal Feed Stop
  • Digital Readout (DRO)
  • Aloris Tool Post & Sets
  • 3-Jaw and 4-Jaw Manual Chucks
Capacity HSX-HD
Swing Over Bed 67" / 73" / 79"
Swing Over Cross Slide 50" / 60" / 66"
Swing in Gap 88" / 94" / 100"
Width of Bed 40"
Distance Between Centers 80” – 472”

 

Headstock HSX-HD
Spindle Bore 6” or 8”
Type of Spindle Nose ASA A2-15
Number of Spindle Speeds 12
Spindle Speed 1.7 - 170 RPM

 

Gear Box HSX-HD
Number of Feed Changes 60 Kinds
Longitudinal Cross 0.003 – .19in/rev / 0.0016 - 0.098 in/rev
Leadscrew Diam. & Threads per Inch 2 1/2” & 2 TPI
Threading range - Whitworth ½ - 28 TPI (50 kinds)
Threading range - Metric 1 to 56mm pitch (32 kinds)

 

 

Tool Slide HSX-HD
Maximum Travel of Compound 8.85”
Maximum Travel of Cross Slide 39.3”

 

 

Tailstock HSX-HD
Tailstock Quill Travel 11.8”
Tailstock Quill Diameter 7.08”
Tailstock Center M.T. #7

 

Motor HSX-HD
Main Drive Motor 40HP (Opt. 50HP)
Rapid Travel Motor 2 HP

 

Dimensions HSX-HD
Packing Dimensions 89”W x 99”H            192” – 586” L
Weight (lbs) 33,069 – 77,160 lbs
Loading Capacity Between Centers 28,660 lbs
With One Steady Rest 35,273 lbs
With Two Roller Rests 55,225 lbs