CSX
Extra Large Swing Capacity
Overview
Kingston's CSX is the largest and brawniest entry in its heavy-duty lineup, boasting an impressive 59" swing (35.4"over cross slide) for your largest work pieces — upgradable to 75" over bed and 51.1" over cross slide — and a colossal 1-meter (39.4") bed width for maximal stability during the heaviest cutting. Spindle bore sizes up to 14.8" and lengths to 240" between centers – plus a powerful 60 HP motor – mean this machine can tackle anything.
Standard Features
- Bore: 7.1", 10.0", or 14.7"
- Swing: 59", 67", or 75"
- Swing Over Cross Slide: 35.4", 43.3", or 51.1"
- C.C.: 80" — 240"
- 50 HP / 60 HP (30 min)
- 39.4” Bed Width
- Box Way Cross Slide and Carriage
- V8 Hydraulic Turret (H6 or H4 Optional)
- Front & Rear Chuck Ready
- Rear Spindle Safety Door
- Center Chip Conveyor (Beneath Bed Way)
- Tailstock with Built-in Center
- FANUC 0iTF Controller w/ Manual Guide i & Threading Repair, 10.4" Monitor
Optional Accessories
- V12 Live Tooling Turret & Mechanical Spindle Indexing
- Additional Rear Turret: H4 (350)
- Steady Rest with Roller Jaw with Two Sleeves (17.7" ~ 25.7", 25.6" ~ 31.5")
- Roller Bracket (24.4" ~ 41.3")
- 7” Boring Bar Support
- 4" Sleeve for 7" Boring Bar Support
- High Pressure Coolant Pump
- Front or Rear Chip Conveyor (In Addition to Center Conveyor)
- Additional Swing Diameter
- Fanuc Arbitrary Speed Threading
- Manual, Hydraulic, & Air Chucks
| Capacity | CSX 7 | CSX 10 | CSX 14 |
| Swing Over Bed | 59", 67", 75" | 59", 67", 75" | 59", 67", 75" |
| Swing Over Cross Slide | 35.4" / 43.3" / 51.1" | 35.4" / 43.3" / 51.1" | 35.4" / 43.3" / 51.1" |
| Distance Between Centers | 80” / 120” / 160” / 200” / 240” | 80” / 120” / 160” / 200” / 240” | 80” / 120” / 160” / 200” / 240” |
| Maximum Cutting Length | 79” / 118” / 158” / 197” / 237” | 79” / 118” / 158” / 197” / 237” | 79” / 118” / 158” / 197” / 237” |
| Width of Bed | 39.4" | 39.4" | 39.4" |
| Headstock | CSX 7 | CSX 10 | CSX 14 |
| Spindle Bore | 7.1" | 10.0" | 14.7" |
| Spindle Motor | 50 HP / 60 HP (30min) | 50 HP / 60 HP (30min) | 50 HP / 60 HP (30min) |
| Type of Spindle Nose | A2-15 | A2-15 | A2-20 |
| Gear Box | CSX 7 | CSX 10 | CSX 14 |
| Number of Speed Ranges | 2 | 2 | 2 |
| Spindle Speed (RPM) | 6 — 650 | 6 — 650 | 4 — 500 |
| Turret | CSX 7 | CSX 10 | CSX 14 |
| Turret | V8 Hydraulic (Std), H4 or H6 (Opt) | V8 Hydraulic (Std), H4 or H6 (Opt) | V8 Hydraulic (Std), H4 or H6 (Opt) |
| Traverse | CSX 7 | CSX 10 | CSX 14 |
| Max. Stroke X-Axis | 28.9" | 28.9" | 28.9" |
| Max. Stroke Z-Axis | 82.5” / 121.8” / 161.2” / 200.6” / 240.0” | 82.5” / 121.8” / 161.2” / 200.6” / 240.0” | 82.5” / 121.8” / 161.2” / 200.6” / 240.0” |
| Rapid Traverse X-Axis | 236”/min | 236”/min | 236”/min |
| Rapid Travers Z-Axis | 236”/min | 236”/min | 236”/min |
| Motor | CSX 7 | CSX 10 | CSX 14 |
| Servo Motor X-Axis | 5.3 HP | 5.3 HP | 5.3 HP |
| Servo Motor Z-Axis | 8.0 HP | 8.0 HP | 8.0 HP |
| Ball Screw | CSX 7 | CSX 10 | CSX 14 |
| X-Axis | Ø1.41”, P6 | Ø1.41”, P6 | Ø1.41”, P6 |
| Z-Axis | Ø2.48”, P12 | Ø2.48”, P12 | Ø2.48”, P12 |
| Tailstock | CSX 7 | CSX 10 | CSX 14 |
| Tailstock Quill (Nose, Taper, Bearing) | A-1-8, M.T. #6, 33024 | A-1-8, M.T. #6, 33024 | A-1-8, M.T. #6, 33024 |
| Tailstock Quill Diameter | Ø9.4” | Ø9.4” | Ø9.4” |
| Tailstock Quill Travel | 7.1" | 7.1" | 7.1" |
| Dimensions | CSX 7 | CSX 10 | CSX 14 |
| Floor Space (LxW) | 305” / 344” / 384” / 423” / 470” x 151” | 305” / 344” / 384” / 423” / 470” x 151” | 305” / 344” / 384” / 423” / 470” x 151” |
| Machine Height | 91" | 91" | 91" |
| Weight | CSX 7 | CSX 10 | CSX 14 |
| Net Weight (lbs) | 31,372 / 35,442 / 39,556 / 43,670 / 47,806 | 31,372 / 35,442 / 39,556 / 43,670 / 47,806 | 31,372 / 35,442 / 39,556 / 43,670 / 47,806 |
| Total Power Required | CSX 7 | CSX 10 | CSX 14 |
| 100 KVA | 100 KVA | 100 KVA |