KMT 3V
Milling Machine

Overview

The KMT-3V brings Kingston's commitment to quality to a precision milling machine. Turcite-B, which coats the sliding surfaces of the X- and Y-axis for optimal performance, and Meehanite casting make these mills ready to tackle all types of projects. The spindle contains a Class 7 precision bearing and a maximum runout within .0002 inches, with spindle speeds up to 4200 RPM. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. The KMT-3V features a 3 HP motor and an R8 nose; Kingston's rugged design and sturdy head housing ensure this well-built machine will last for years.

Optional Accessories

  • Best Line Table Power Feed
  • Best Line Cross Power Feed
  • Best Line Knee Power Feed
  • A & T Mechanical Power Lock Drawbar
  • Yaskawa Frequency Inverter Drive (Factory Installation Only)
  • Work Light
  • Coolant System
  • Chip Pan
  • Digital Readout (DRO)

Standard Features

  • 3 HP Motor, R8 Nose
  • Hardened & Ground Dovetail Ways for Knee & Table
  • Meehanite Casting
  • Turcite-B on X & Y Axis
  • Class 7 Precision Bearing (P4) for Spindle
  • Dual Locks on Knee, Table, Saddle, & Ram
  • Max Spindle Runout .0002

Overview

The KMT-3V brings Kingston's commitment to quality to a precision milling machine. Turcite-B, which coats the sliding surfaces of the X- and Y-axis for optimal performance, and Meehanite casting make these mills ready to tackle all types of projects. The spindle contains a Class 7 precision bearing and a maximum runout within .0002 inches, with spindle speeds up to 4200 RPM. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. The KMT-3V features a 3 HP motor and an R8 nose; Kingston's rugged design and sturdy head housing ensure this well-built machine will last for years.

Optional Accessories

  • Best Line Table Power Feed
  • Best Line Cross Power Feed
  • Best Line Knee Power Feed
  • A & T Mechanical Power Lock Drawbar
  • Yaskawa Frequency Inverter Drive (Factory Installation Only)
  • Work Light
  • Coolant System
  • Chip Pan
  • Digital Readout (DRO)

Standard Features

  • 3 HP Motor, R8 Nose
  • Hardened & Ground Dovetail Ways for Knee & Table
  • Meehanite Casting
  • Turcite-B on X & Y Axis
  • Class 7 Precision Bearing (P4) for Spindle
  • Dual Locks on Knee, Table, Saddle, & Ram
  • Max Spindle Runout .0002
Capacity  
Table 10" x 50"
Travel (X x Y) 36.0" x 16.0"
Travel (Z) Quill 5.0"
Travel (Z) Knee 16.0"
Spindle Motor 3 HP
Spindle Taper R8
Spindle Speed 60 – 4200 RPM
Spindle Power Feed Rate 0.0015"/Rev, 0.003"/Rev, 0.006"/Rev

 

Dimensions  
Overall Height 84.6"
Overall Length 64.6"
Overall Width 67.7"
Weight 2,750 lbs