Milling Machine


The KMT-5V is the most robust machine in Kingston's celebrated line of KMT mills. The KMT-5V features a 5 HP motor and an NT#40 nose; the rugged design and sturdy head housing ensure this well-built machine will last for years. Turcite-B, which coats the sliding surfaces of the X- and Y-axis for optimal performanceand Meehanite casting make these mills ready to tackle all types of projects. The spindle contains a Class 7 precision bearing and a maximum runout within .0002 inches, with spindle speeds up to 4200 RPM. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. Every shop needs at least one mill – the KMT-5V has you covered. 

Standard Features

  • 5 HP Motor, NT#40 Nose
  • Square Ways in Both Y & Z Axis
  • Meehanite Casting
  • Turcite-B on X & Y Axis
  • Class 7 Precision Bearing (P4) for Spindle
  • Dual Locks on Knee, Table, Saddle, & Ram
  • Max Spindle Runout .0002

Optional Accessories

  • Best Line Table Power Feed
  • Best Line Cross Power Feed
  • Best Line Knee Power Feed
  • A & T Mechanical Power Lock Drawbar
  • Yaskawa Frequency Inverter Drive (Factory Installation Only)
  • Work Light
  • Coolant System
  • Chip Pan
  • Digital Readout (DRO)
Table 10" x 50"
Travel (X x Y) 36.0" x 17.5"
Travel (Z) Quill 5.0"
Travel (Z) Knee 17.5"
Spindle Motor 5 HP
Spindle Taper NT#40
Spindle Speed 60 – 4200 RPM
Spindle Power Feed Rate 0.0015"/Rev, 0.003"/Rev, 0.006"/Rev


Overall Height 93.6"
Overall Length 59.4"
Overall Width 67.7"
Weight 3,630 lbs